Skip to content

Forensic engineering

Forensic electrical engineering in Vancouver and across BC

Forensic electrical engineers in Vancouver investigating electrical fires, equipment failures and power quality losses across BC for insurers and counsel.

Furano Pacific Consulting is an electrical engineering firm in Vancouver that investigates electrical failures for insurers, adjusters, brokers, legal counsel and facility owners across British Columbia. We establish what failed, why it failed, and what the failure mechanism means for causation and the scope of the loss, including whether an electrical fault caused a fire.

Investigations are led by Brennan Town, P.Eng., who heads the firm's electrical practice. Our engineers are registered with Engineers and Geoscientists BC and licensed in Alberta, Saskatchewan and Ontario.

What we investigate

  • Electrical fires — whether wiring, connections, panels, appliances or equipment caused or contributed to a fire, and which component failed first
  • Equipment failures — transformers, switchgear, motor control centres, variable frequency drives, UPS systems and standby generators
  • Power quality losses — harmonic distortion, transient overvoltage, resonance and voltage sags, including failures that only occur on standby power
  • Protection failures — breakers and relays that tripped when they should not have, or did not trip when they should have
  • Utility and outage events — damage following an outage, a transfer to standby generation or a service disturbance
  • Repeat failures — the same equipment failing again after replacement, which usually points to a system cause rather than a defective part

How an investigation runs

  1. Preserve the evidence. Call us before failed equipment is removed or repaired. We advise on what to keep, photograph and log, which often decides whether a cause can be proved.
  2. Attend site. An engineer inspects the installation, the failed equipment and the surrounding system, and records conditions before they change.
  3. Measure. We log power quality with our own Class A analyzers to IEC 61000-4-30 and model the system where fault levels or protection settings matter.
  4. Exclude the alternatives. Each plausible cause is tested and either confirmed or excluded with recorded evidence.
  5. Report. A written finding of root cause, contributing factors and the basis for the loss, citing the standards relied on by edition. Every deliverable is reviewed by a second engineer before it is issued.

Where we work

From our Vancouver office we attend sites across the Lower Mainland, the Fraser Valley, the Sea-to-Sky corridor, Vancouver Island, the Okanagan and Interior, and Northern BC, and in Alberta and Saskatchewan.

Recent investigations

Unit substation failure investigation — medium-voltage service entrance — A unit substation fault traced to how its secondary conductors were installed. Later damage to the transformer was identified as a separate cause.

Transformer failure investigation — industrial distribution system — A recently commissioned transformer failed on re-energisation and tripped the site's main substation. Relay event data placed the fault in the transformer, teardown established the cause, and the protection design was excluded.

Forensic power quality investigation — 24.9 kV campus facility, Abbotsford — Retained on an insurance claim after ten months of recurring drive failures. Root cause: harmonic distortion beyond IEEE 519 limits, amplified three- to four-fold by the standby generator's source impedance. The site's capacitor bank, the obvious suspect, was investigated and excluded with logged data.

Power quality and life-safety failure investigation — residential high-rise — Repeated fire alarm and access control failures investigated with metering and examination of the failed boards. Current distortion exceeded the IEEE 519 limit; water ingress was documented alongside it.

Independence

We report what the evidence supports, including when that does not help the party that retained us. Where a prior engagement at the site creates a conflict, we disclose it before accepting the file.

Forensic engineering and loss consulting · Power quality · Insurance and legal · Power system studies

Send us a file

Submit an assignment with the loss description and any photographs, or call 1 (866) 577-1894.

Talk to us about your project

Send us the scope and the constraints. We will tell you plainly whether we are the right firm for it — and if we are not, we will say so.